Description
Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.
- For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
- Deeper mortises can be achieved with a suitable size of auger bit.
- Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
- Steel plates & body.
- An auger bit and drill is required to complete deep mortises.
- The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
Products Includes:
- 1 x Guide Bush Collar
- 12 x Face Plate Templates
- 5 x Mortise Templates
- 6 x Spacer Fingers
Specifications:
| Door thickness min. | 34 mm |  |
|
|
Door thickness max. | 58 mm | |
|
Template outer size | 234.3 x 59.8 x1.5mm | |
|
Metric (Imperial approx.) (D x OL) | Template | |
|
22.2×156 mm (7/8″x 6 1/8″) | 1 | |
|
22.5×152.5 mm (7/8″x 6″) | 2 | |
|
25.4×121 mm (1″x 4 3/4″) | 3 | |
|
25.4×127.5 mm (1″x 5″) | 4 | |
|
25.4×133.5 mm (1″x 5 1/4″) | 5 | |
|
25.4×145 mm (1″x 5 3/4″) | 6 |
